One great too for this job is GParted.
.
Once you download it and burn it to a disc, just boot from it and you should see a screen like this:
一旦你下載并刻錄到光盤上,只要啟動它,您應該會看到這樣的畫面: 
click to enlarge
點擊放大
I prefer to run GParted with Safe Graphic Settings .
我喜歡運行的安全 GParted 圖形設置。
Just use the up and down arrows to select the mode you want.
只需使用向上和向下箭頭,選擇您想要模式。 
click to enlarge
點擊放大
When prompted to select your keymap, most users will just press Enter and keep the default.
當提示選擇按鍵映射,大多數用戶將只需按下輸入和保持默認。 
click to enlarge
點擊放大

click to enlarge
點擊放大
Next you see some information about how to reconfigure the graphical environment.
接下來,您看到一些有關如何重新配置的圖形環境。 
click to enlarge
點擊放大
Then the live system starts.
然后,生活系統啟動。 
click to enlarge
點擊放大
I prefer to run GParted in a lower screen resolution.
我喜歡運行GParted在較低的屏幕分辨率。
Right-click anywhere on the desktop background and select Fluxbox Menu -> Exit X .
右擊任何地方的桌面背景,并選擇Fluxbox菜單 -> “退出X 。 
click to enlarge
點擊放大
At the command prompt type sudo Forcevideo and press Enter .
在?令提示符下鍵入須藤Forcevideo然后按Enter 。 
click to enlarge
點擊看大圖
I usually choose 800×600 and 16 bit color.
我通常選擇800 × 600和16位顏色。 
click to enlarge
點擊放大
That’sa little better.
這是一個更好一點。
Notice how GParted shows a graphical representation of the partitions on your hard disk.
如何GParted公告顯示圖形代表分區到硬盤上。 
click to enlarge
點擊放大
In this example I’m going to shrink my main Linux partition to make my Swap partition larger.
在這個例子中我將縮小我的主要Linux分區,使我的swap分區更大。
Start by right-clicking on /dev/hda1 and selecting Resize/Move .
首先右鍵點擊/ dev/hda1 ,選擇調整/移動 。 
click to enlarge
點擊放大

click to enlarge
點擊放大
You can drag the arrows at the right or left of the partition to resize it, or just type the values you want in the boxes below.
您可以拖動箭頭在左邊或右邊的分區調整,或只需鍵入的價值要在下面的方塊。
In this example I chose to shrink the partition by 261 MB.
在這個例子中我選擇縮小分區261甲基溴。 
click to enlarge
點擊放大
Click Resize/Move and you are back at the main GParted screen.
按大小/移動 ,你回來的主要GParted屏幕。
Notice the information in the lower pane of the window showing the pending operation.
公告的信息在較低的窗格中顯示的窗口懸而未決的行動。 
click to enlarge
點擊放大
Next, Right-click on the /dev/hda2 extended partition and select Resize/Move .
下一步,右鍵點擊/ dev/hda2擴展分區 ,并選擇大小/移動 。 
click to enlarge
點擊放大
This window is very similar to the earlier one.
此窗口非常相似早先。 
click to enlarge
點擊放大
I dragged the left edge of the partition all the way to the left in order to consume all the free space, then clicked Resize/Move .
俺拖的左邊緣分割的方式所有的左側,以消耗所有可用空間,然后按下調整/移動 。 
click to enlarge
點擊放大
Next, right-click on /dev/hda5 , the linux-swap partition and select Resize/Move .
接下來,右擊/ dev/hda5 , Linux的swap分區,并選擇大小/移動 ? 
click to enlarge
點擊放大
By now this should look familiar.
到現在這應該眼熟。 
click to enlarge
點擊放大
I again dragged the left edge of the partition all the way to the left in order to consume all the free space, then clicked Resize/Move .
我再次拖的左邊緣分割的方式所有的左側,以消耗所有可用空間,然后按下調整/移動 。 
click to enlarge
點擊放大
Review the three pending operations in the bottom pane of the window.
審查三年懸而未決的行動在底部窗格的窗口。
If they are correct, click Apply .
如果他們是正確的, 單擊應用。 
click to enlarge
點擊放大
This is your last chance to bail out.
這是你最后一次機會保釋外出。
If you’re sure, click Apply .
如果您確定, 單擊應用。 
click to enlarge
點擊放大
When you see this window, go for coffee.
當你看到這個窗口,去咖啡。
It’s probably going to take a while.
這可能會需要一段時間。 
click to enlarge
點擊放大
Once GParted is finished, close it, shutdown the live image, remove the CD and boot back into your usual Linux installation.
一旦GParted完成后,將其關閉,停產的生活形象,消除CD和開機到您通常Linux安裝。